Overview

The CLAP 630 stake by FARO is designed for those who want to illuminate a path, an entrance, or a corner of the garden without complications. It is driven directly into the ground and projects a warm, concentrated light where it is needed. It takes up no space, requires no additional structures, and fits well both in a large garden and on a smaller terrace.

The built-in spotlight has a color temperature of 3000K, which gives a warm tone similar to traditional incandescent light. With a beam angle of 38°, the light does not scatter: it is directed, which is useful for highlighting plants, curbs, steps, or any outdoor element that needs to be clearly marked.

FARO is a Spanish brand with decades of experience in lighting. Its outdoor products are designed to withstand real-use conditions, with materials intended for open-air environments.

Installation and specifications

Before installing this outdoor stake, keep in mind that it operates at 24V. This means it requires a compatible transformer or power supply, which is not included. It is advisable to plan the cable routing before placing the stake, especially if several units are to be installed in a line. Fixing is directly into the ground: the lower part is inserted into the soil to the depth indicated by the manufacturer. If the ground is hard or has compacted gravel, it may be necessary to prepare a small pilot hole. For installations in areas with automatic irrigation, make sure that the electrical connections are well protected and kept away from direct moisture.

To keep the luminaire in good condition, clean the aluminum body with a slightly damp cloth when you notice an accumulation of dust or dirt. Avoid abrasive products or solvents that may affect the rust brown finish. Do not handle the lamp while it is on or connected to the mains. If the stake is installed in an area with heavy foot traffic, periodically check that it remains firmly fixed to the ground.

• Brand: FARO
• Category: Outdoor
• Subcategory: Surface luminaire
• Fixing: Ground
• Main material: Aluminum
• Body material: Aluminum + Aluminum
• Body finish (color): Rust brown
• Energy class of the light source: F
• Maximum power (W): 6
• Light source: COB LED
• Light source included: Yes
• Color temperature (K): 3000K
• Beam angle: 38°
• Operating voltage: 24V
• Height (mm): 630
• Length (mm): 36
• Depth (mm): 97
• Net weight (kg): 1.67

Design and use

The design of the CLAP 630 stake addresses a specific need: marking a path, illuminating a low area of the garden, or signaling an entrance without installing a large lantern or resorting to a wall-mounted floodlight. At 630 mm in height, it protrudes just enough from the ground for the light to reach where it should, without visually interfering with the surroundings.

The body is made of aluminum, a material that combines lightness and durability. The rust brown finish gives it a sober appearance that does not draw much attention during the day but effectively fulfills its function at night. This tone blends easily into gardens with vegetation, earth or gravel surfaces, stone or wooden pavements. It does not look out of place in either more rustic settings or outdoor spaces with a more contemporary style.

The included light source is a 6W COB LED with a color temperature of 3000K. This type of LED produces a compact and uniform light, with no visible hot spots. The 38° angle concentrates the beam, allowing precise illumination without wasting light to the sides. It is a practical solution for highlighting a shrub, bordering a garden path, or marking the boundary between different outdoor areas.

Operating at 24V makes this luminaire safer for outdoor installations. The low voltage reduces the risk in the event of accidental contact with the wiring, something that can happen in gardens where work is carried out regularly. It also allows several bollards to be connected in series without the need to install a high-power electrical circuit.

In an access patio, this type of stake works well placed next to the door or along the entrance path. On a terrace with plants, it can be used to graze light across planters or to visually separate different areas. In larger gardens, several units installed in a line create a bollard effect that guides the route without saturating the space with light.

The CLAP 630 stake also fits into installations where other outdoor lights are already present, such as wall spotlights or facade floodlights. It does not compete with them, but rather complements the illumination at ground level, where the other light points do not reach. If the garden has a pergola, it can be combined with hanging lights at the top and these stakes below, achieving different lighting planes that make the space more pleasant at night.

The weight of 1.67 kg makes it easy to handle during installation, without the need for special tools or additional help. Aluminum as the main material ensures that it does not rust over time, even in areas with frequent rainfall or high ambient humidity.

Questions and answers

Does the CLAP 630 stake include the 24V power supply required for its operation?

No, the power supply is not included. The luminaire operates at 24V and requires a compatible external transformer. It must be purchased separately before installation.

Does the 38° angle of the LED source allow illuminating a long path or only a small area?

The 38° angle is narrow, which means it concentrates the light on a specific area. To illuminate a long path, it is recommended to install several bollards in series, separated at a regular distance, so that the light cones follow one another without leaving dark areas between them.

Does the rust brown finish on the aluminum body deteriorate with prolonged exposure to sun and rain?

The aluminum with a rust brown finish is designed for outdoor use. The material does not rust and the finish is applied to withstand normal weathering conditions. Periodic cleaning with a damp cloth is sufficient to keep the appearance in good condition.

After-sales support

If upon receiving the product you notice any manufacturing defect or damage during shipping, you have 30 days to report it. In that case, write to us with the order details and a description of the problem. Each situation is handled individually to find the most appropriate solution, whether that is a replacement or an alternative arrangement. We do not follow automatic procedures: we review each case carefully to provide you with a concrete response.

How delivery works

Martsella works with brands and their partner warehouses across Europe. Your order is sent straight from the warehouse that holds the item, so an order with several items may arrive in separate parcels. Each parcel gets its own tracking link.

14-day returns

Changed your mind? You can cancel within 14 days of delivery without giving a reason. How to send items back and what a return costs is on our Returns & Refunds page. If an item is faulty, damaged or not what you ordered, we cover the cost of returning it.

How to cancel

Email info@martsella.com with your order number before the cancellation period ends, or use the model cancellation form on our Returns & Refunds page. You do not have to use the form.