Overview

ANDY is an outdoor spike light designed to illuminate gardens, patios and terraces with a clean, tidy result. It is pushed directly into the ground and directs light upward, highlighting plants, trees or decorative objects without the need for construction work or complex installations.

The satin gold finish gives it a polished, contemporary look. It does not draw too much attention during the day, but at night it fulfills its purpose well: it defines spaces, creates atmosphere and gives the outdoor area a distinctive presence.

FARO is a Spanish brand with experience in technical and decorative lighting. Their outdoor products are designed to last under real conditions of use, with materials and finishes that remain in good condition over time.

Installation and specifications

No special tools are needed to install this outdoor spike light. Simply push it into the ground at the desired location and connect it to the wiring. It is recommended that the electrical cabling be handled by an electrician, as it must be protected and buried at the depth required by local regulations. Before installation, check that the chosen location has access to the electrical network and that the wiring is compatible with the indicated voltage.

The steel body requires no special maintenance, but it is advisable to clean it occasionally with a damp cloth to remove accumulated dirt or grime. Avoid using abrasive products that could damage the satin gold finish. The transparent polycarbonate diffuser can be cleaned with water and mild soap. Do not submerge the luminaire in water or use pressure washers directly on it.

• Brand: FARO
• Category: Outdoor
• Subcategory: Surface luminaire
• Fixing: Ground (spike)
• Body material: Steel
• Diffuser material: PC (polycarbonate)
• Body finish: Satin gold
• Diffuser finish: Transparent
• Maximum power: 5 W
• Light source: GU10 LED
• Light source included: No
• Voltage: 100V–240V
• Height: 400 mm
• Length: 56 mm
• Depth: 56 mm
• Net weight: 0.51 kg
• Gross weight with box: 0.6 kg

Design and use

The ANDY spike light by FARO is an outdoor luminaire with a simple and well-resolved design. Its steel body with a satin gold finish has a narrow profile of 56 x 56 mm and a height of 400 mm, making it discreet in a garden or patio without losing visual presence when switched on.

The transparent polycarbonate diffuser allows the light from the GU10 LED bulb to emerge directly, concentrated toward where the lamp is aimed. This makes it a practical tool for highlighting specific elements: the trunk of a tree, a large pot, a garden sculpture or a plant area alongside a path. The idea is not to illuminate large surfaces, but to create points of light that give depth to the outdoor space at night.

On a terrace, several spike lights of this type placed along the perimeter can define the space without the need for lampposts or wall luminaires. In a larger garden, they work well in combination with other spotlights or floodlights that provide general illumination, while the spikes take care of the details.

The satin gold finish is a choice that fits well in outdoor settings with metallic elements in warm or neutral tones. It also works alongside materials such as wood or stone, which are common in residential gardens and patios. During the day, the spike goes fairly unnoticed. At night, the transparent diffuser clearly reveals the light source, reinforcing the decorative effect without artifice.

It requires a GU10 LED bulb of up to 5 W, which is not included. This type of bulb is easy to find and allows you to choose the color temperature that best suits the atmosphere you want to create: warmer light for a cozy effect, or more neutral if greater definition is desired. Low-consumption LED bulbs are the most common option for this type of outdoor installation.

Being made of steel, the lamp has good structural solidity. The weight of 0.51 kg makes it easy to handle during installation. Once placed in the ground, it remains stable without the need for additional anchoring in most common garden substrates.

ANDY is an option for those who want to improve the look of their outdoor space with something more than functional lighting. The result is a garden or patio with more character at night, without major construction work or complicated installations.

Thinking about how to organize the lighting of an outdoor space is sometimes simpler than it seems. A few well-positioned spike lights can transform a garden that at night appeared flat and without depth into a space with differentiated zones, clear visual pathways and points of interest. There is no need to approach it as a complex installation: it is enough to identify the elements that deserve attention — a tree with a fine canopy, a shrub with a defined shape, a gravel area with low plants — and place a spike in front of each one. The result is noticeable from the very first night.

On a covered or semi-open terrace, this type of floor luminaire can also serve to mark the boundaries of the space without resorting to wall lanterns or overhead projectors. Two or three units distributed around the perimeter create a sense of an orderly enclosure, especially when combined with softer lights in other areas. For a smaller interior courtyard, a single well-placed spike can be enough to completely change the perception of the space at nightfall.

The simplicity of ANDY's design makes it compatible with very different styles. In a garden with modern lines, smooth materials and sparse vegetation, the slim profile and metallic finish fit in effortlessly. In a more natural setting, with stone, aged wood or abundant vegetation, the satin golden tone provides a subtle contrast that does not clash. It is not a lamp that seeks to stand out, but one that complements the overall setting well. In that sense, it works in a similar way to other outdoor lighting elements that fulfill their role best the less they are noticed as an object and the more the effect they generate is perceived.

It is also a good solution for those who do not want to rely on solar energy or rechargeable batteries. Unlike solar options, this spike light works with a conventional electrical connection, which guarantees stable operation regardless of the number of hours of sunlight on the previous day. There are no variations in intensity or risk of it switching off earlier than expected. For those who have tried solar alternatives in the past and have been unsatisfied with the consistency of performance, this difference is significant. The solar option has its uses in certain contexts, but when constant reliability and full control over lighting are required, a mains connection is more suitable.

Finally, it is worth considering that an installation of this type does not have to be permanent. If at some point you want to reorganize the garden or change the distribution of the illuminated elements, the spikes can be pulled out of the ground and repositioned elsewhere without any damage to the luminaire or the ground. That flexibility is a real advantage over more permanent solutions such as in-ground recessed spotlights or fixed projectors on structures. With ANDY, the outdoor space can evolve at the same pace as those who use it.

Questions and answers

Is the GU10 LED bulb included with the ANDY spike light?

No, the GU10 LED bulb is not included in the package. It must be purchased separately. The maximum accepted wattage is 5 W.

What type of ground is needed for the spike to be properly fixed?

The spike is pushed directly into the ground. It works well in garden soil or common soft substrates. On very compact or stony surfaces it may be more difficult to push in without damaging the steel body.

Does the polycarbonate diffuser withstand rain and continuous outdoor use well?

Polycarbonate is a resistant material commonly used in outdoor luminaires. It handles normal conditions of use in gardens or patios well, including rain and temperature variations.

After-sales support

If the product arrives with a manufacturing defect, you have 30 days to report it. Write to us with a description of the problem and, if possible, some photos of the item's condition. Each case is studied individually to find the best solution, whether that is a replacement or handling of the incident as appropriate.

Estimated delivery	Thu 12 Nov – Wed 18 Nov (United Kingdom)
Delivery cost	£4.95
Dispatched from	Spain

How delivery works

Martsella works with brands and their partner warehouses across Europe. Your order is sent straight from the warehouse that holds the item, so an order with several items may arrive in separate parcels. Each parcel gets its own tracking link.

14-day returns

Changed your mind? You can cancel within 14 days of delivery without giving a reason. How to send items back and what a return costs is on our Returns & Refunds page. If an item is faulty, damaged or not what you ordered, we cover the cost of returning it.

How to cancel

Email info@martsella.com with your order number before the cancellation period ends, or use the model cancellation form on our Returns & Refunds page. You do not have to use the form.