Overview

This outdoor wall light from the brand FARO is designed for those looking for a functional and well-built wall lamp without sacrificing a careful finish. It mounts directly onto the wall and is used to illuminate entrances, facades, terraces, and any outdoor area where continuous and stable light is needed.

The body is made of injection-moulded aluminium with a dark grey finish, giving it solidity without adding excessive weight. The opal glass diffuser distributes light evenly, without direct glare or areas with pronounced shadows. It is a wall light that works discreetly: it does not draw too much attention during the day and performs its function well when it gets dark.

FARO is a brand of Catalan origin with decades of experience in indoor and outdoor luminaires. Its products combine contemporary design with materials built to last, and this wall light is a good example of that line of work.

Installation and specifications

To install this wall light, you need to fix it directly onto the exterior wall. Before you begin, make sure to cut the power supply at the main panel. Check that the surface where it will be mounted is solid and flat. The total weight is just over one kilogram, so the anchors must be firmly secured, especially if the wall is made of porous materials. The bulb is not included, so have an E27 LED bulb of up to 15 W ready before installation.

To clean the aluminium body, a slightly damp cloth is sufficient. Avoid abrasive products or solvents that could damage the dark grey finish. The glass diffuser can be cleaned with a soft cloth and, if there is an accumulation of outdoor dirt, with water and a neutral detergent. Do not direct pressurised water jets directly onto the lamp. Periodically check that the anchors remain secure, especially after seasons with strong winds or heavy rain.

• Brand: FARO
• Category: Outdoor
• Subcategory: Surface luminaire
• Mounting: Wall
• Body material: Aluminium
• Diffuser material: Glass
• Body colour: Dark grey
• Diffuser finish: Opal
• Maximum wattage (W): 15
• Light source: E27 LED
• Light source included: No
• Voltage: 100V-240V
• Height (mm): 70
• Length (mm): 280
• Depth (mm): 120
• Net weight (kg): 1,06
• Gross weight with box (kg): 1,18

Design and use

The FARO wall light has an elongated and discreet profile that adapts well to different types of facade, from modern cladding to more traditional masonry walls. At 280 mm long and only 70 mm high, it takes up little visual space but projects light effectively towards the area to be illuminated. The dark grey finish works both on light-coloured walls, where it creates contrast, and on more neutral surfaces, where it blends in without standing out excessively.

The injection-moulded aluminium body is the standard material in mid-to-high quality outdoor luminaires. It withstands typical atmospheric conditions — temperature variations, ambient humidity, rain — without the body deforming or losing its finish easily. It is a material that requires no special maintenance and retains its appearance for years if cleaned regularly.

The translucent opal glass diffuser means that the light from the bulb is not visible directly from the outside, which prevents glare when passing close to the lamp. Instead, the light is distributed softly and evenly, which is useful both at entrances used daily and in garden areas where ambient lighting is desired rather than a focused spotlight.

This wall light works with an E27 LED bulb, the most common on the market. This means it is easy to find the right bulb in any store and that the light tone — warmer or cooler — can be adjusted to each person's taste or the function of the area to be illuminated. A warm light works well at a main entrance; at a multi-purpose terrace, a neutral colour temperature may be more versatile.

Wall mounting makes it useful for passageways where no ceiling is available or where a wall light is more practical than a ceiling luminaire. A side entrance, access to a garage, the side of a terrace, or the perimeter wall of a garden are all places where this type of lamp fits well. It can also be used in combination with other outdoor luminaires to create layered lighting along a path or facade.

Although it does not include a motion sensor or integrated detector, it can be connected without issue to an external sensor system or a timer. This allows the lamp to switch on and off on its own without the need for a manual switch, which is especially convenient in areas with frequent nighttime access. A motion or presence sensor installed on the same circuit would make the lamp behave like an automated wall light without modifying the luminaire itself.

The contemporary design of the wall light suits recently built or renovated facades, without appearing out of place in more classic settings if the rest of the space has a careful finish. It is not a traditional lantern nor a robust-looking industrial luminaire: it is a lamp with clean lines that does not distract and that performs its function of illuminating the exterior well without unnecessary prominence.

Questions and answers

Is this outdoor wall light compatible with external motion sensor systems?

Yes. The lamp does not include an integrated detector, but it can be connected to an external motion sensor or timer installed on the same circuit. This makes it possible to automate switching on without needing to modify the luminaire.

Does the opal glass diffuser withstand temperature changes outdoors well?

The translucent glass used in this wall light is designed for outdoor use and withstands the typical temperature variations in temperate climates. It requires no additional treatment to maintain its optical properties or its finish.

Does the 100V-240V voltage allow this wall light to be used in any standard domestic installation?

Yes. That voltage range covers both European 220V-240V installations and other mains voltages, so the wall light is compatible with the majority of domestic electrical installations without the need for adapters or converters.

After-sales support

If upon receiving the product you detect any manufacturing defect or damage caused during transport, you have 30 days to report it. Each case is handled individually to find the best possible solution, whether that is the replacement of the part or the substitution of the product. For any query related to defects or returns, you can write to us and we will respond as promptly as possible.

Estimated delivery	Thu 12 Nov – Wed 18 Nov (United Kingdom)
Delivery cost	£4.95
Dispatched from	Spain

How delivery works

Martsella works with brands and their partner warehouses across Europe. Your order is sent straight from the warehouse that holds the item, so an order with several items may arrive in separate parcels. Each parcel gets its own tracking link.

14-day returns

Changed your mind? You can cancel within 14 days of delivery without giving a reason. How to send items back and what a return costs is on our Returns & Refunds page. If an item is faulty, damaged or not what you ordered, we cover the cost of returning it.

How to cancel

Email info@martsella.com with your order number before the cancellation period ends, or use the model cancellation form on our Returns & Refunds page. You do not have to use the form.