Overview
Overview
The DART RCT is an outdoor recessed fixture designed for signage and lighting on facades, entrances, and passageways. It is installed directly into the wall, flush with the surface, with no part of the body visibly protruding. The result is a clean line, with no elements interrupting the continuity of the wall or facade.
The housing is made of polycarbonate and the diffuser is clear glass. The 3000K LED light source emits a warm tone, suitable for guiding without glare. It is useful at covered entrances, outdoor corridors, open-air staircases, or any point where a route needs to be marked discreetly.
FARO is a Spanish company with decades of experience in the design and manufacture of luminaires. Their outdoor products are designed to blend into the environment without drawing excessive attention, prioritizing functionality and durability.
Installation and specifications
A compatible recessed box is essential for installing this recessed fixture. Valid references are 70274N, 70275N, and 70276N. Before starting assembly, make sure the box is correctly positioned in the wall and that the wiring is switched off and de-energized. The fixture is secured to the box once the cable has been laid. It is recommended that installation be carried out by a qualified electrician, especially for outdoor installations exposed to moisture.
To keep the glass diffuser in good condition, clean it with a soft, slightly damp cloth. Avoid abrasive products or solvents that may damage the surface. The polycarbonate body requires no special maintenance, but it is advisable to periodically check the condition of the seal if the recessed fixture is exposed to direct rain.
- Brand: FARO
- Category: Outdoor
- Subcategory: Recessed luminaire
- Mounting: Wall
- Body material: Polycarbonate (PC)
- Diffuser material: Glass
- Body finish: Matte black
- Diffuser finish: Transparent
- Light source energy class: D
- Maximum power (W): 3.1
- Light source type: SMD LED
- Light source included: Yes
- Voltage: 220V–240V
- Colour temperature (K): 3000K
- Height (mm): 80
- Length (mm): 190
- Depth (mm): 36
- Net weight (kg): 0.3
- Gross weight with individual box (kg): 0.44

Design and use
The DART RCT is installed flush with the wall, making it a visually discreet solution. There is no protruding body, no visible cables. What can be seen from the outside is the clear glass diffuser and the matte black frame, integrated into the wall surface.
This type of fixture is common in route signage: garden entrances, outdoor staircases, corridors between open-air areas, or building entrances. The light it emits is not intended to broadly illuminate a space, but to mark a specific point, indicate where the ground is, a corner, or a change in level. For that purpose, a 3000K lamp with a glass diffuser works well: the light is warm, not harsh, and is distributed in a controlled manner.
The polycarbonate body provides mechanical resistance without adding weight. At 0.3 kg on the scale, the fixture is lightweight and requires no special support beyond the recessed box. The glass diffuser gives a more refined finish than standard plastic, and holds up better over time in outdoor conditions.
The matte black colour is a choice that works well on both dark and light-coloured facades. On a stone or exposed brick wall, the black does not compete with the texture of the material. On a white or grey plastered facade, it acts as a clean point of contrast. Also available in white for those who prefer the fixture to blend in with lighter surfaces.
In terms of consumption, the maximum power of 3.1W places it among low-consumption recessed fixtures. It is not a high-power spotlight, nor is it intended to be. Its function is specific and for signage, not general lighting. It can be combined with other fixtures of the same model to create a sequence of light points along a path or outdoor staircase.
The elongated format — 190 mm in length and 80 mm in height — adapts well to walls with little available depth, as the mounting depth is only 36 mm. This facilitates installation in thin walls or where there is not much space for the box. Check the compatible box references before starting work to ensure that the assembly fits correctly in your installation.
In a garden, the DART RCT can be used to mark the entrance from the street or guide the route to the main entrance. On a terrace, it serves to mark the edge of a step or indicate the direction of a path. It is also useful in interior courtyards with outdoor access, where a discreet light signal is needed that does not cause glare or light pollution to the surroundings.

Questions and answers
Is it necessary to purchase the recessed box separately to install the DART RCT?
Yes. This recessed fixture requires a specific recessed box for wall installation. The compatible references are 70274N, 70275N, and 70276N. Without the appropriate box, it is not possible to correctly secure the fixture to the wall.
Is the DART RCT available in any colour other than matte black?
Yes, the model is also available in white, in case you prefer the recessed fixture to blend better into facades or walls with lighter tones.
Is the 3000K colour temperature suitable for outdoor night-time signage?
Yes. 3000K emits a warm light that is comfortable to the eye in outdoor night-time settings. It does not cause glare, and is sufficient to mark routes, steps, or entrances without generating intense lighting that could be disruptive.
After-sales support
If you notice any defect upon receiving the product, you have 30 days to report it. Each case is handled individually to find the best solution, whether replacement or return.
For any enquiry related to defects or issues, write to us. We respond as quickly as possible and aim to resolve each situation in a straightforward and hassle-free manner.

Specifications
| Brand | FARO |
|---|---|
| Model | 70278N |
| SKU | 70278N |
| EAN | 8421776322004 |
| Light output | 207 lm |
|---|---|
| Colour temperature | 3000 K |
| Energy class | D |
| Height | 80 mm |
|---|---|
| Depth | 36 mm |
| Length | 190 mm |
| Bulb cap | Integrated LED |
|---|---|
| Bulb included | Yes |
| Wattage | 3.1 W |
| IP rating | IP65 |
| Electrical class | Class II |
| Mounting | Wall |
| Input voltage | 220–240 V |
| Colour | Matt Black |
|---|
Delivery & returns
| Estimated delivery | Thu 12 Nov – Wed 18 Nov (United Kingdom) |
|---|---|
| Delivery cost | £4.95 |
| Dispatched from | Spain |
How delivery works
Martsella works with brands and their partner warehouses across Europe. Your order is sent straight from the warehouse that holds the item, so an order with several items may arrive in separate parcels. Each parcel gets its own tracking link.
14-day returns
Changed your mind? You can cancel within 14 days of delivery without giving a reason. How to send items back and what a return costs is on our Returns & Refunds page. If an item is faulty, damaged or not what you ordered, we cover the cost of returning it.
How to cancel
Email info@martsella.com with your order number before the cancellation period ends, or use the model cancellation form on our Returns & Refunds page. You do not have to use the form.
Product safety
UK importer
Martsym Trade LtdSuite 13079, 43 Bedford Street
London WC2E 9HA
United Kingdom
info@martsella.com
No specific warnings for this product. Use as described in the instructions.
Instructions (PDF)
Information provided under Regulation (EU) 2023/988 on general product safety. Model: 70278N · SKU: 70278N · EAN: 8421776322004
Reviews
No reviews yet