Overview

The CLAP projector by FARO is an outdoor luminaire designed for those who want to illuminate with precision without the fixture itself drawing attention. It is installed in the ground and directs light exactly where it is needed: onto a façade, a tree, a stone wall, or a decorative element in the garden. The result is accent lighting that defines the space without overloading the eye.

What sets this spotlight apart is its size. With just 63 mm in height and a weight of 0.35 kg, it goes almost unnoticed once placed. The focus is on the light, not the projector. This makes it especially useful when you want to create a scenographic atmosphere outdoors, without visible elements that interrupt the aesthetics of the surroundings.

FARO is a Spanish brand with decades of experience in lighting. Its CLAP line is conceived as a cohesive system that allows different types of luminaires to be combined under the same aesthetic, from bollards and stakes to wall lights and projectors. This spotlight is part of that system and can be integrated with other elements of the family for a complete and uniform solution.

Installation and specifications

For installation, keep in mind that this luminaire is fixed to the ground by direct anchoring. As it is an outdoor spotlight, it is essential that the electrical connection be carried out by a qualified installer and that the wiring is properly protected underground or through a suitable conduit for outdoor use. Before placing the projector, verify that the installation point is level to ensure correct orientation of the light beam.

For maintenance, clean the surface with a slightly damp cloth and avoid abrasive products that could damage the rust brown finish. Periodically check the anchors, especially after extreme temperature changes or after winter. Do not submerge the luminaire or expose it to direct high-pressure water jets.

• Brand: FARO
• Category: Outdoor
• Subcategory: Surface luminaire
• Fixing: Ground
• Main material: Aluminium
• Body finish: Rust Brown
• Light source: COB LED
• Light source included: Yes
• Colour temperature: 2700K
• Maximum power: 6W
• Energy class of the light source: E
• Beam angle: 38°
• Height: 63 mm
• Length: 36 mm
• Depth: 97 mm
• Net weight: 0.35 kg
• Gross weight with box: 0.38 kg

Design and use

The CLAP projector stands out for its restrained geometry. The aluminium housing has an almost flat profile that makes it difficult to perceive from a distance, especially in an environment with vegetation or dark paving. The rust brown colour integrates naturally into gardens, patios, and outdoor accesses where earth tones, stone, or wood predominate.

The COB LED light source is recessed inside the body, which means there is no direct glare when looking towards the spotlight. The light appears on the surface it illuminates, not on the fixture. This detail improves the visual comfort of those moving through the space, and also allows for a more refined atmosphere, where the light defines the scene without the reflector interrupting the visual composition.

With a colour temperature of 2700K, the light it emits is warm. This tone favours relaxed environments and adds warmth to materials such as stone, brick, treated wood, or vegetation. It is a colour temperature that works well when seeking a strong visual presence without creating a feeling of coldness or an industrial space.

The 38° angle concentrates the light beam in a defined area. It is useful for highlighting a specific element: the trunk of a tree, the detail of a façade, a sculpture in the garden, or the start of a path. If several projectors are combined and oriented differently, it is possible to build a complete scenographic lighting scheme at ground level, modulating which parts of the space are lit and which remain in shadow.

The CLAP system allows precisely that: combining this projector with other elements of the family to cover different needs in the same outdoor area. A patio or terrace can integrate bollards to define the perimeter, wall lights on the walls, and this ground-level spotlight to highlight specific points, all with the same aesthetic and the same finish.

If the situation requires it, the specific anti-glare visor for CLAP can be added, which allows even finer control over the direction of the light and reduces the visibility angle of the projector from certain points in the space. It is an accessory that is especially useful when the spotlight is in a passage area or near seating areas in the garden.

The 6W power makes this LED efficient in consumption. For an accent projector aimed at domestic outdoor use, it is sufficient to fulfil its function without adding a notable energy cost. The use of COB technology guarantees a uniform light emission within the beam, without spots of greater or lesser intensity.

Questions and answers

Does the CLAP projector include the COB LED light source, or does it need to be purchased separately?

The COB LED light source is already included in the projector. It is not necessary to purchase or install any additional components for the luminaire to function.

Is the 38° angle fixed, or can it be adjusted once the spotlight is installed in the ground?

The beam angle is 38° and corresponds to the optical characteristics of the integrated light source. The orientation of the beam is regulated by rotating or tilting the body of the projector during installation, before its position is definitively fixed.

Is the anti-glare visor directly compatible with this model, or does it require adapters?

The anti-glare visor is designed specifically for the CLAP family, so it is compatible with this projector without the need for additional parts. It can be purchased separately and added at the time of installation when greater control over the light beam is desired.

After-sales support

If upon receiving the product you detect any manufacturing defect, you have 30 days to report it. Each case is handled individually: write to us indicating the order number and a description of the problem, and we will find the most appropriate solution. We respond as quickly as possible.

How delivery works

Martsella works with brands and their partner warehouses across Europe. Your order is sent straight from the warehouse that holds the item, so an order with several items may arrive in separate parcels. Each parcel gets its own tracking link.

14-day returns

Changed your mind? You can cancel within 14 days of delivery without giving a reason. How to send items back and what a return costs is on our Returns & Refunds page. If an item is faulty, damaged or not what you ordered, we cover the cost of returning it.

How to cancel

Email info@martsella.com with your order number before the cancellation period ends, or use the model cancellation form on our Returns & Refunds page. You do not have to use the form.